
Описание
Характеристики
Информация для заказа
General ordering data | |
Type | PRO DM 20 |
Order No. | 2486080000 |
Version | Diode module, 24 V DC |
GTIN (EAN) | 4050118496819 |
Qty. | 1 pc(s). |
Dimensions and weights | |
Width | 32 mm |
Width (inches) | 1.26 inch |
Height | 125 mm |
Height (inches) | 4.921 inch |
Depth | 125 mm |
Depth (inches) | 4.921 inch |
Net weight | 568 g |
Temperatures | |
Humidity | 5–95% rel. humidity, Tu = 40°C, no condensation |
Operating temperature, max. | 70 °C |
Operating temperature, min. | -40 °C |
Storage temperature, max. | 85 °C |
Storage temperature, min. | -40 °C |
Operating temperature | -40 °C...70 °C |
Storage temperature | -40 °C...85 °C |
Input | |
Connection system | Screw connection |
DC input voltage range | 0...60 V DC |
Input current | 2 ? 24 A (-40 °C ~ +45 °C), 2 ? 20 A (+45 °C ~ +60 °C), 2 ? 15 A (+70 °C) |
Input fuse (internal) | No |
Rated input voltage | 24 V DC |
output | |
Connection system | Screw connection |
Continuous output current @ URated | 1 ? 48 A (-40 °C ~ +45 °C), 1 ? 40 A (+45 °C ~ +60 °C), 1 ? 30 A (+70 °C) |
Parallel connection option | yes, max 2. |
Protection against inverse voltage | Yes |
Rated output voltage | VIN-typ. 0.7 V |
Residual ripple, breaking spikes | Dependent on the power supplies used |
General data | |
Degree of efficiency | > 97% @ 24 V input voltage |
Derating | > 60°C / 75% load @ 70°C |
Housing version | Metal, corrosion resistant |
Humidity | 5–95% rel. humidity, Tu = 40°C, no condensation |
MTBF | > 150,000 h in accordance with MIL-HDBK-217 (40°C, Bellcore), > 750,000 h in accordance with IEC 1709 (40°C, EN29500) |
Mounting position, installation notice | Horizontal on TS35 mounting rail. 50 mm of clearance at top & bottom for air circ. Can mount side by side with no space in between. |
Operating temperature | -40 °C...70 °C |
Protection degree | IP20 |
Surge voltage category | III |
EMC / shock / vibration | |
Vibration resistance IEC 60068-2-6 | 2.3 g (on DIN rail) |
Interference immunity test acc. to | EN 55022, EN 55024, EN 61000-3-2,-3, EN 61000-4-2 (ESD)|EN 61000-4-3 and EN 61000-4-8 (fields)|EN 61000-4-4 (burst)|EN 61000-4-5 (surge)|EN 61000-4-6 (conducted) |
Shock resistance IEC 60068-2-27 | 30 g in all directions |
Insulation coordination | |
Class of protection | III, with no ground connection, for SELV |
Insulation voltage input / earth | 0.5 kV |
Insulation voltage output / earth | 0.5 kV |
Pollution severity | 2 |
Surge voltage category | III |
Electrical safety (applied standards) | |
Electrical machine equipment | Acc. to EN60204 |
For use with electronic equipment | Acc. to EN50178 / VDE0160 |
Protective separation / protection against electrical shock | VDE0100-410 / acc. to DIN57100-410 |
Safety extra-low voltage | SELV acc. to EN60950, PELV acc. to EN60204 |
Connection data (input) | |
Conductor cross-section, AWG/kcmil , max. | 10 |
Conductor cross-section, AWG/kcmil , min. | 26 |
Conductor cross-section, flexible , min. | 0.22 mm? |
Conductor cross-section, rigid , max. | 6 mm? |
Conductor cross-section, rigid , min. | 0.18 mm? |
Connection system | Screw connection |
Number of terminals | 4 (1+, 2+, 1-, 2-) |
Screwdriver blade | 0.8 x 4.0, PZ 1 |
Tightening torque, max. | 0.6 Nm |
Tightening torque, min. | 0.5 Nm |
Wire connection cross section, flexible (input), max. | 4 mm? |
Основные | |
---|---|
Состояние | Новое |
- Цена: Цену уточняйте