Operating interfaces and control inputs |
DIP switch | Inversion of transistor outputs, Operation without temperature probe |
Output current selector switch | 20 A, 10 A |
Remote disconnection (Interlock) | Yes |
Selector switch battery | 1.3 Ah, 3.4 Ah, 7.2 Ah, 12 Ah, 17 Ah, No Battery, Service |
Selector switch buffer times | 0.5 min, 1 min, 3 min, 5 min, 10 min, 20 min, 30 min, 45 min, ?, ? w/0 |
Temperature probe | NTC 100 k? |
|
output |
Continuous output current @ URated | 24 A @ 45 °C, 20 A @ 60 °C, 15 A @ 70 °C |
Output current, max. | 24 A |
Output voltage | Vo = Vin - 0.2 V normal operation (Imax), Vo = Vin - 0.3 V battery operation (Imax) |
Overload protection | Yes |
Parallel connection option | yes, max 2., Yes, with diode module |
Power reserve at nom. voltage | 24 A for 1 min, ED = 5 % |
Protection against inverse voltage | Yes |
Rated (nominal) output current @ UNom | 20 A @ 60 °C |
Rated output voltage | 24 V DC ± 1 % |
Residual ripple, breaking spikes | < 50 mVSS @ 24 V DC, IN |
Temperature coefficient | - 48 mV / °C |
Temperature probe | NTC 100 k? |
Wire connection method | Screw connection |
|
General data |
Buffer times | Depending on the connected battery |
Clip-in foot | metal |
Current limiting | > 120 % IN |
Degree of efficiency | ? 96% normal mode, battery is being charged, ? 98% normal mode, battery is charged, ? 98% buffer mode |
Housing version | Metal, corrosion resistant |
Humidity | 5...95 %, no condensation |
MTBF | > 500,000 h acc. to IEC 1709 (SN29500 |
Mounting position, installation notice | Horizontal on TS35 mounting rail. 50 mm of clearance at top & bottom for air circ. Can mount side by side with no space in between. |
Operating temperature | -25 °C...70 °C |
Power loss | < 10 W |
Protection against reverse voltages from the load | 32…34 V DC |
Protection degree | IP20 |
Short-circuit protection | Yes |
Storage medium | 1.3 Ah, 3.4 Ah, 7.2 Ah, 12 Ah, 17 Ah, Selectable with rotary switch |
Surge voltage category | III |
|