Корзина
Нет отзывов, добавить
КазахстанАлматыЛобачевского 78А
+7 (705) 183 95 87
Официальный представитель Weidmuller ТОО "DIA Engineering Group"
Корзина
Источник питания управляемый PRO MAX 240W 24V 10A, фото 2
Источник питания управляемый PRO MAX 240W 24V 10A, фото 2
Описание
Характеристики
Информация для заказа
General ordering data
Type PRO MAX 240W 24V 10A
Order No. 1478130000
Version Power supply, switch-mode power supply unit, 24 V
GTIN (EAN) 4050118286052
Qty. 1 pc(s).
Availability Stock article
Dimensions and weights
Width 60 mm
Width (inches) 2.362 inch
Height 130 mm
Height (inches) 5.118 inch
Depth 125 mm
Depth (inches) 4.921 inch
Net weight 1,050 g
Temperatures
Humidity at operating temperature 5...95 %, no condensation
Operating temperature, max. 70 °C
Operating temperature, min. -25 °C
Storage temperature, max. 85 °C
Storage temperature, min. -40 °C
Operating temperature -25 °C...70 °C
Storage temperature -40 °C...85 °C
Input
AC current consumption 1.5 A @ 230 V AC / 3 A @ 115 V AC
AC input voltage range 85…277 V AC
Connection system Screw connection
DC current consumption 1,5A @ 370 VDC / 3A @ 120 VDC
DC input voltage range 80...370 V DC
Frequency range AC 45…65 Hz
Input fuse (internal) Yes
Inrush current max. 15 A
Rated input voltage 100...240 V AC (wide-range input)
Recommended back-up fuse 10 A, char. B circuit breaker, 6…8 A, char. C circuit breaker
Standby power consumption, max. 1 W
Surge protection Varistor
output
Connection system Screw connection
Continuous output current @ URated 12 A @ 45°C, 7,5 A @ 70°C
Output power 240 W
Output voltage 24 V
Output voltage 22.5...29.5 V (adjustable via potentiometer)
Parallel connection option yes, max. 5
Power reserve at nom. voltage 12 A (1 min), 15 A (4s)
Protection against inverse voltage Yes
Pulsed current capacity @ URated 30 A (2ms)
Rated (nominal) output current @ UNom 10 A @ 60 °C
Rated output voltage 24 V DC ± 1 %
Residual ripple, breaking spikes < 50 mVss @ UNenn, Full Load
General data
AC failure bridging time @ INom min. 20 ms
Current limiting > 120 % IN
Degree of efficiency 91.5%
Derating > 60°C / 75% @ 70°C
Earth leakage current, max. 3.5 mA
Housing version Metal, corrosion resistant
MTBF >500.000h (25°C, IEC 61709)
Mounting position, installation notice Horizontal on TS35 mounting rail. 50 mm of clearance at top & bottom for air circ. Can mount side by side with no space in between.
Operating temperature -25 °C...70 °C
Power factor (approx.) > 0.95 @ 230 V AC
Power loss, idling 2.4 W
Power loss, nominal load 22.3 W
Protection against reverse voltages from the load 30…35 V DC
Protection degree IP20
Series switching capability Yes
Short-circuit protection Yes
Start-up ? -40 °C
Status indication LED red/green and relay (?21.6 V DC LED green, relay on/ ?20.6 LED red, relay off)
Surge voltage category III
EMC / shock / vibration
Vibration resistance IEC 60068-2-6 2.3 g
Interference immunity test acc. to EN 55024, EN 55022, IEC61000-3-2,-3, IEC61000-4-2,-3,-4,-5,-6,-8,-11
Shock resistance IEC 60068-2-27 30 g in all directions
Insulation coordination
Class of protection I, with PE connection
Humidity at operating temperature 5...95 %, no condensation
Insulation voltage input / earth 3.5 kV
Insulation voltage output / earth 0.5 kV
Insulation voltage, input/output 4 kV
Pollution severity 2
Surge voltage category III
Electrical safety (applied standards)
Electrical machine equipment Acc. to EN60204
For use with electronic equipment Acc. to EN50178 / VDE0160
Protection against dangerous shock currents Acc. to VDE0106-101
Protective separation / protection against electrical shock VDE0100-410 / acc. to DIN57100-410
Safety extra-low voltage SELV acc. to EN60950, PELV acc. to EN60204, IEC61204
Safety transformers for switch-mode power supplies nach EN61558-2-16
Connection data (input)
Conductor cross-section, AWG/kcmil , max. 10 
Conductor cross-section, AWG/kcmil , min. 26 
Conductor cross-section, flexible , min. 0.22 mm?
Conductor cross-section, rigid , max. 6 mm?
Conductor cross-section, rigid , min. 0.18 mm?
Connection system Screw connection
Number of terminals 3 for L/N/PE
Screwdriver blade 0.8 x 4.0, PZ 1
Tightening torque, max. 0.6 Nm
Tightening torque, min. 0.5 Nm
Wire connection cross section, flexible (input), max. 4 mm?
СостояниеНовое
  • Цена: Оптовые и розничные цены уточняйте