| output |
| Connection system | Screw connection |
| Continuous output current @ URated | 12 A @ 45°C, 7,5 A @ 70°C |
| Output power | 480 W |
| Output voltage | 48 V |
| Output voltage | 30...56 V (adjustable via potentiometer) |
| Parallel connection option | yes, max. 5 |
| Power reserve at nom. voltage | 12 A (1 min), 15 A (4s), 100…240 V AC |
| Protection against inverse voltage | Yes |
| Pulsed current capacity @ URated | 60 A (2ms) |
| Rated (nominal) output current @ UNom | 10 A @ 60 °C |
| Rated output voltage | 48 V DC ± 1 % |
| Residual ripple, breaking spikes | < 50 mVss @ UNenn, Full Load |
|
| General data |
| AC failure bridging time @ INom | min. 20 ms |
| Current limiting | > 120 % IN |
| Degree of efficiency | 93% |
| Derating | > 60°C / 75% @ 70°C |
| Earth leakage current, max. | 3.5 mA |
| Housing version | Metal, corrosion resistant |
| MTBF | >500.000h (25°C, IEC 61709) |
| Mounting position, installation notice | Horizontal on TS35 mounting rail. 50 mm of clearance at top & bottom for air circ. Can mount side by side with no space in between. |
| Operating temperature | -25 °C...70 °C |
| Power factor (approx.) | > 0.95 @ 230 V AC |
| Power loss, idling | 4.8 W |
| Power loss, nominal load | 36.1 W |
| Protection against reverse voltages from the load | 58 … 65 V DC |
| Protection degree | IP20 |
| Series switching capability | No |
| Short-circuit protection | Yes |
| Start-up | ? -40 °C |
| Status indication | LED red/green and relay (?21.6 V DC LED green, relay on/ ?20.6 LED red, relay off) |
| Surge voltage category | III |
|
| Electrical safety (applied standards) |
| Electrical machine equipment | Acc. to EN60204 |
| For use with electronic equipment | Acc. to EN50178 / VDE0160 |
| Protection against dangerous shock currents | Acc. to VDE0106-101 |
| Protective separation / protection against electrical shock | VDE0100-410 / acc. to DIN57100-410 |
| Safety extra-low voltage | SELV acc. to EN60950, PELV acc. to EN60204, IEC61204 |
| Safety transformers for switch-mode power supplies | nach EN61558-2-16 |
|
| Connection data (input) |
| Conductor cross-section, AWG/kcmil , max. | 10 |
| Conductor cross-section, AWG/kcmil , min. | 26 |
| Conductor cross-section, flexible , min. | 0.22 mm? |
| Conductor cross-section, rigid , max. | 6 mm? |
| Conductor cross-section, rigid , min. | 0.18 mm? |
| Connection system | Screw connection |
| Number of terminals | 3 for L/N/PE |
| Screwdriver blade | 0.8 x 4.0, PZ 1 |
| Tightening torque, max. | 0.6 Nm |
| Tightening torque, min. | 0.5 Nm |
| Wire connection cross section, flexible (input), max. | 4 mm? |
|
