Корзина
Нет отзывов, добавить
КазахстанАлматыЛобачевского 78А
+7 (705) 183 95 87
Официальный представитель Weidmuller ТОО "DIA Engineering Group"
Корзина
Источник питания управляемый PRO MAX3 480W 24V 20A, фото 2
Источник питания управляемый PRO MAX3 480W 24V 20A, фото 2
Описание
Характеристики
Информация для заказа
General ordering data
Type PRO MAX3 480W 24V 20A
Order No. 1478190000
Version Power supply, switch-mode power supply unit, 24 V
GTIN (EAN) 4050118286144
Qty. 1 pc(s).
Dimensions and weights
Width 70 mm
Width (inches) 2.756 inch
Height 130 mm
Height (inches) 5.118 inch
Depth 150 mm
Depth (inches) 5.905 inch
Net weight 1,600 g
Temperatures
Humidity at operating temperature 5...95 %, no condensation
Operating temperature, max. 70 °C
Operating temperature, min. -25 °C
Storage temperature, max. 85 °C
Storage temperature, min. -40 °C
Operating temperature -25 °C...70 °C
Storage temperature -40 °C...85 °C
Input
AC current consumption 0,7A @ 3*500 VAC / 0,85 @ 3*400 VAC
AC input voltage range 3 x 320...3 x 575 V AC / 2 x 360...2 x 575 V AC
Connection system Screw connection
DC current consumption 0.7 A @ 800 V DC / 1.2 A @ 450 V DC
DC input voltage range 450...800 V DC (max. 500 V DC acc. to UL508)
Frequency range AC 45…65 Hz
Input fuse (internal) Yes
Inrush current max. 15 A
Rated input voltage 3 x 400...3 x 500 V AC (wide-range input)
Recommended back-up fuse 3 - 5 A Char. C, circuit breaker
Standby power consumption, max. 1 W
Surge protection Varistor
output
Connection system Screw connection
Continuous output current @ URated 24 A @ 45°C, 15 A @ 70°C
Output power 480 W
Output voltage 24 V
Output voltage 22.5...29.5 V (adjustable via potentiometer)
Parallel connection option yes, max. 3
Power reserve at nom. voltage 24 A (1 min), 30 A (4s)
Protection against inverse voltage Yes
Pulsed current capacity @ URated 60 A (2ms)
Rated (nominal) output current @ UNom 20 A @ 60 °C
Rated output voltage 24 V DC ± 1 %
Residual ripple, breaking spikes < 50 mVss @ UNenn, Full Load
General data
AC failure bridging time @ INom min. 20 ms
Current limiting > 120 % IN
Degree of efficiency 91.5%
Derating > 60°C / 75% @ 70°C
Earth leakage current, max. 3.5 mA
Housing version Metal, corrosion resistant
MTBF >500.000h (25°C, IEC 61709)
Mounting position, installation notice Horizontal on TS35 mounting rail. 50 mm of clearance at top & bottom for air circ. Can mount side by side with no space in between.
Operating temperature -25 °C...70 °C
Power factor (approx.) > 0.85 @ 3*400 V AC
Power loss, idling 4.8 W
Power loss, nominal load 44.6 W
Protection against reverse voltages from the load 30…35 V DC
Protection degree IP20
Series switching capability Yes
Short-circuit protection Yes
Start-up ? -40 °C
Status indication LED red/green and relay (?21.6 V DC LED green, relay on/ ?20.6 LED red, relay off)
Surge voltage category III
EMC / shock / vibration
Vibration resistance IEC 60068-2-6 2.3 g
Interference immunity test acc. to EN 55024, EN 55022, IEC61000-3-2,-3, IEC61000-4-2,-3,-4,-5,-6,-8,-11
Shock resistance IEC 60068-2-27 30 g in all directions
Insulation coordination
Class of protection I, with PE connection
Humidity at operating temperature 5...95 %, no condensation
Insulation voltage input / earth 3.5 kV
Insulation voltage output / earth 0.5 kV
Insulation voltage, input/output 4 kV
Pollution severity 2
Surge voltage category III
Electrical safety (applied standards)
Electrical machine equipment Acc. to EN60204
For use with electronic equipment Acc. to EN50178 / VDE0160
Protection against dangerous shock currents Acc. to VDE0106-101
Protective separation / protection against electrical shock VDE0100-410 / acc. to DIN57100-410
Safety extra-low voltage SELV acc. to EN60950, PELV acc. to EN60204, IEC61204
Safety transformers for switch-mode power supplies nach EN61558-2-16
Connection data (input)
Conductor cross-section, AWG/kcmil , max. 10 
Conductor cross-section, AWG/kcmil , min. 26 
Conductor cross-section, flexible , min. 0.22 mm?
Conductor cross-section, rigid , max. 6 mm?
Conductor cross-section, rigid , min. 0.18 mm?
Connection system Screw connection
Number of terminals 4 for L1/L2/L3/PE
Screwdriver blade 0.8 x 4.0, PZ 1
Tightening torque, max. 0.6 Nm
Tightening torque, min. 0.5 Nm
Wire connection cross section, flexible (input), max. 4 mm?
СостояниеНовое
  • Цена: Оптовые и розничные цены уточняйте