Корзина
Нет отзывов, добавить
КазахстанАлматыЛобачевского 78А
+7 (705) 183 95 87
Официальный представитель Weidmuller ТОО "DIA Engineering Group"
Корзина
Источник питания управляемый PRO TOP1 120W 24V 5A, фото 2
Источник питания управляемый PRO TOP1 120W 24V 5A, фото 2
Описание
Характеристики
Информация для заказа
General ordering data
Type PRO TOP1 120W 24V 5A
Order No. 2466870000
Version Power supply, switch-mode power supply unit, 24 V
GTIN (EAN) 4050118481457
Qty. 1 pc(s).
Dimensions and weights
Width 35 mm
Width (inches) 1.378 inch
Height 130 mm
Height (inches) 5.118 inch
Depth 125 mm
Depth (inches) 4.921 inch
Net weight 850 g
Temperatures
Humidity at operating temperature 5...95 %, no condensation
Operating temperature, max. 70 °C
Operating temperature, min. -25 °C
Storage temperature, max. 85 °C
Storage temperature, min. -40 °C
Operating temperature -25 °C...70 °C
Storage temperature -40 °C...85 °C
Input
AC input voltage range 85…277 V AC
Connection system PUSH IN with actuator
DC input voltage range 48…410 V DC (Derating 40% @ 48 V DC)
Dielectric strength max. 300 V AC ? 15 s
Frequency range AC 45…65 Hz
Input fuse (internal) Yes
Inrush current max. 5 A
Power factor input > 0.9
Rated input voltage 100 - 240 V AC / 120 - 340 V DC
Surge protection Varistor
output
DCL - peak load reserve 150 % (5 s); 600 % (12 ms)
Connection system PUSH IN with actuator
Mains failure bridge-over time > 20 ms @ 115V AC/ 230 VAC
Output power 120 W
Output voltage 24 V
Output voltage 22.5...29 V
Parallel connection option Passive Current Sharing
Power reserve at nom. voltage 130% permanent at ? 40°C
Protection against inverse voltage Yes
Ramp-up time ? 100 ms
Rated (nominal) output current @ UNom 5 A @ 60 °C
Rated output voltage 24 V DC ± 1 %
Residual ripple, breaking spikes < 50 mVss @ UNenn, Full Load
Triggerable circuit breakers C2
General data
AC failure bridging time @ INom > 20 ms @ 230 V AC / > 20 ms @ 115 V AC
Degree of efficiency typ. 91 %
Derating > 60°C (2.5% / 1°C)
Earth leakage current, max. 3.5 mA
Housing version Metal, corrosion resistant
MTBF > 1.000.000 h according IEC 1709 (SN29500)
Mounting position, installation notice Horizontal on DIN rail TS 35, top and bottom 50 mm clearance for free air flow, 10 mm clearance to neighbouring active subassemblies with full load, 5 mm with passive neighbouring subassemblies, direct row mounting with 90% rated load
Operating temperature -25 °C...70 °C
Power factor (approx.) > 0.90 @ 230 V AC
Protection degree IP20
Series switching capability Yes
Short-circuit protection Yes, internal
Surge voltage category III
EMC / shock / vibration
Vibration resistance IEC 60068-2-6 2.3 g (on DIN rail), 4 g (with direct mounting)
Interference immunity test acc. to EN 55024, EN 55032 (EN 55022), EN 61000-6-1, 2, 3, 4
Shock resistance IEC 60068-2-27 30 g in all directions
Insulation coordination
Class of protection I, with PE connection
Humidity at operating temperature 5...95 %, no condensation
Insulation voltage input / earth 4 kV
Insulation voltage output / earth 0.5 kV
Insulation voltage, input/output 4 kV
Pollution severity 2
Surge voltage category III
Electrical safety (applied standards)
Electrical machine equipment Acc. to EN60204
For use with electronic equipment Acc. to EN50178 / VDE0160
Protection against dangerous shock currents Acc. to VDE0106-101
Protective separation / protection against electrical shock VDE0100-410 / acc. to DIN57100-410
Safety extra-low voltage SELV acc. to EN60950, PELV acc. to EN60204
Safety transformers for switch-mode power supplies nach EN61558-2-16
Connection data (input)
Conductor cross-section, AWG/kcmil , max. 12 
Conductor cross-section, AWG/kcmil , min. 20 
Conductor cross-section, flexible , min. 0.5 mm?
Conductor cross-section, rigid , max. 1.5 mm?
Conductor cross-section, rigid , min. 0.5 mm?
Connection system PUSH IN with actuator
Number of terminals 3 for L/N/PE
Wire connection cross section, flexible (input), max. 2.5 mm?
СостояниеНовое
  • Цена: Оптовые и розничные цены уточняйте