Корзина
Нет отзывов, добавить
КазахстанАлматыЛобачевского 78А
+7 (705) 183 95 87
Официальный представитель Weidmuller ТОО "DIA Engineering Group"
Корзина
Источник питания управляемый PRO COM CAN OPEN, фото 2
Описание
Характеристики
Информация для заказа
General ordering data
Type PRO TOP1 960W 48V 20A
Order No. 2466920000
Version Power supply, switch-mode power supply unit, 48 48 V
GTIN (EAN) 4050118481600
Qty. 1 pc(s).
Dimensions and weights
Width 124 mm
Width (inches) 4.882 inch
Height 130 mm
Height (inches) 5.118 inch
Depth 125 mm
Depth (inches) 4.921 inch
Net weight 3,382 g
Temperatures
Humidity at operating temperature 5...95 %, no condensation
Operating temperature, max. 70 °C
Operating temperature, min. -25 °C
Storage temperature, max. 85 °C
Storage temperature, min. -40 °C
Operating temperature -25 °C...70 °C
Storage temperature -40 °C...85 °C
Input
AC input voltage range 85…277 V AC
Connection system PUSH IN
DC input voltage range 80 ... 410 V DC
Dielectric strength max. 300 V AC ? 15 s
Frequency range AC 45…65 Hz
Input fuse (internal) Yes
Inrush current max. 15 A
Power factor input > 0.9
Rated input voltage 100 - 240 V AC / 120 - 340 V DC
Surge protection Varistor
output
DCL - peak load reserve 150 % (5 s); 500 % (12 ms)
Connection system PUSH IN
Mains failure bridge-over time > 20 ms @ 115V AC/ 230 VAC
Output power 960 W
Output voltage 48 48 V
Output voltage 45...56 V
Parallel connection option Passive Current Sharing
Power reserve at nom. voltage 130% permanent at ? 40°C
Protection against inverse voltage Yes
Ramp-up time ? 100 ms
Rated (nominal) output current @ UNom 20 A @ 60 °C
Rated output voltage 48 V DC ± 1 %
Residual ripple, breaking spikes < 50 mVss @ UNenn, Full Load
Triggerable circuit breakers C2, C4, C6, B6, B10
General data
AC failure bridging time @ INom > 20 ms @ 230 V AC / > 20 ms @ 115 V AC
Degree of efficiency typ. 94,5 %
Derating > 60°C (2.5% / 1°C)
Earth leakage current, max. 3.5 mA
Housing version Metal, corrosion resistant
MTBF > 1.000.000 h according IEC 1709 (SN29500)
Mounting position, installation notice Horizontal on DIN rail TS 35, top and bottom 50 mm clearance for free air flow, 10 mm clearance to neighbouring active subassemblies with full load, 5 mm with passive neighbouring subassemblies, direct row mounting with 90% rated load
Operating temperature -25 °C...70 °C
Power factor (approx.) > 0.90 @ 230 V AC
Protection degree IP20
Series switching capability Yes
Short-circuit protection Yes, internal
Surge voltage category III
EMC / shock / vibration
Vibration resistance IEC 60068-2-6 2.3 g (on DIN rail), 4 g (with direct mounting)
Interference immunity test acc. to EN 55024, EN 55032 (EN 55022), EN 61000-6-1, 2, 3, 4
Shock resistance IEC 60068-2-27 30 g in all directions
Insulation coordination
Class of protection I, with PE connection
Humidity at operating temperature 5...95 %, no condensation
Insulation voltage input / earth 4 kV
Insulation voltage output / earth 0.5 kV
Insulation voltage, input/output 4 kV
Pollution severity 2
Surge voltage category III
Electrical safety (applied standards)
Electrical machine equipment Acc. to EN60204
For use with electronic equipment Acc. to EN50178 / VDE0160
Protection against dangerous shock currents Acc. to VDE0106-101
Protective separation / protection against electrical shock VDE0100-410 / acc. to DIN57100-410
Safety extra-low voltage SELV acc. to EN60950, PELV acc. to EN60204
Safety transformers for switch-mode power supplies nach EN61558-2-16
Connection data (input)
Conductor cross-section, AWG/kcmil , max.
Conductor cross-section, AWG/kcmil , min. 20 
Conductor cross-section, flexible , min. 0.75 mm?
Conductor cross-section, rigid , max. 16 mm?
Conductor cross-section, rigid , min. 0.75 mm?
Connection system PUSH IN
Number of terminals 3 for L/N/PE
Wire connection cross section, flexible (input), max. 16 mm?
СостояниеНовое
  • Цена: Оптовые и розничные цены уточняйте